Quote · Disconnect · Rig · Pay
Selling Industrial Electrical Equipment in Mequon, WI
The electrical equipment in a decommissioned Mequon facility is almost always worth more than a scrap yard will tell you. Medium-voltage breakers, copper-wound transformers, obsolete breakers and current-production panelboard interiors all resell into a working replacement market. We pay against that market and subtract our removal cost openly instead of burying it in the number.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm CT. We never resell your contact information.
- Location
- Mequon, WI
- State
- Wisconsin
- Utilities
- We Energies, Alliant Energy, Wis
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Mequon
Wisconsin equipment tends to be well maintained, which matters more than people expect — resale value is mostly a question of whether the next owner can still buy parts, and Wisconsin plants keep their documentation. The paper mills along the Fox River from Green Bay to Appleton run large motor and drive installations that get rebuilt rather than abandoned, so what comes out is genuinely serviceable. Milwaukee heavy machinery and controls manufacturing, the foundries around Racine and Kenosha, and the dairy processing plants spread across the southern half of the state all release motor control centers and dry-type transformers. We Energies has been converting generation and distribution steadily, which puts substation-grade gear into the market on a predictable schedule. For Mequon specifically, that density helps: crews already move through Milwaukee, Madison, Green Bay, Racine and Kenosha, so mobilization is a scheduling question rather than a cost problem.
For Mequon sites we quote two ways when it helps: a single number for the scope as it stands, and a line-by-line itemization showing what the switchgear, the transformers, the panelboards and the cable each contribute. Some teams need the lump sum to move an approval; others need the detail for their asset records. You can have both.
Equipment
What we buy in Mequon
Fourteen categories. We buy every one of them at Mequon sites.
Bus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsElectrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Mequon lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete breakers and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Mequon site |
| Freight | I-94, I-43, I-41 and I-39 |
Safety
Safety and documentation
Safety is scope, not a brochure page. Crews working in Mequon operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
We cover the whole Wisconsin market, so if your equipment is not in Mequon itself, one of these is probably closer:
Common questions
Mequon questions
Do you actually buy electrical equipment in Mequon, or just broker it?
We buy it. Midwest Electrical Buyers is the purchaser of record — we fund the purchase, send our own crews to Mequon to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Mequon?
A single transformer, one switchgear section, a pallet of breakers or a few boxes of breakers is worth a call. Because we route crews across Wisconsin continuously, small Mequon pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Mequon site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Mequon is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Mequon room is still partly live we phase the work.
How do you handle transformer oil in Mequon?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Mequon and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Mequon dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
Electrical equipment in Mequon?
Photos of the nameplates are enough to start. Written offer the same business day.