Own crews · Own trailers · MI
Industrial Electrical Equipment Buyers Serving Auburn Hills, MI
The electrical equipment in a decommissioned Auburn Hills facility is almost always worth more than a scrap yard will tell you. Medium-voltage breakers, copper-wound transformers, obsolete breakers and current-production panelboard interiors all resell into a working replacement market. We pay against that market and subtract our removal cost openly instead of burying it in the number.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm CT. We never resell your contact information.
- Location
- Auburn Hills, MI
- State
- Michigan
- Utilities
- DTE Energy, Consumers Energy, La
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Auburn Hills
Michigan industry gives Auburn Hills projects a real secondary market close by. Michigan work is tooling-cycle work. Stamping plants, body shops and powertrain lines across the Detroit metro and down the I-94 corridor reconfigure on model changeovers, and each changeover frees motor control centers, drive cabinets, dry-type transformers and feeder cable. The plants that close outright release whole electrical scopes, including gear from the 1960s and 70s that operators elsewhere are still hunting to match. Grand Rapids office furniture and food processing, the Midland chemical complex and the foundries around Saginaw and Muskegon add to it. DTE Energy and Consumers Energy both run large distribution replacement programs. Michigan is also where we see the most unit substations still sitting energized on the pad, which is fine — we handle the de-energized removal. Equipment that leaves your site frequently goes back into service within a few hundred miles of where we picked it up, and that is what lets us pay above metal value.
If the Auburn Hills equipment is still carrying load, we phase it. Usually that means dead sections and spares first, then distribution as circuits are released, then the main line-up once the last feeder is isolated. The phasing goes into the offer so nobody is improvising in an energized room at two in the morning.
Equipment
What we buy in Auburn Hills
Fourteen categories. We buy every one of them at Auburn Hills sites.
Bus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsElectrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Transformer oil is the item sellers in Auburn Hills worry about most, and fairly so. We test it, drain it, manifest it through licensed handlers and hand you the documentation. PCB-suspect units are handled under their own waste profile. The cost of that handling is already inside the offer, so nothing surprises you after the fact.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Auburn Hills site |
| Freight | I-94, I-75, I-96 and I-69 |
Safety
Safety and documentation
If your Auburn Hills facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
We cover the whole Michigan market, so if your equipment is not in Auburn Hills itself, one of these is probably closer:
Common questions
Auburn Hills questions
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Auburn Hills lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Auburn Hills purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Auburn Hills, or just broker it?
We buy it. Midwest Electrical Buyers is the purchaser of record — we fund the purchase, send our own crews to Auburn Hills to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Auburn Hills?
A single transformer, one switchgear section, a pallet of breakers or a few boxes of breakers is worth a call. Because we route crews across Michigan continuously, small Auburn Hills pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Auburn Hills site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Auburn Hills is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Auburn Hills room is still partly live we phase the work.
Electrical equipment in Auburn Hills?
Photos of the nameplates are enough to start. Written offer the same business day.