Serving Westmont and the surrounding metro
Industrial Electrical Equipment Buyers Serving Westmont, IL
Most Westmont plant engineers call us at one of two moments: the week a capital upgrade is approved, or the week a demolition contractor asks who is taking the electrical scope. The question is the same either way — what is it worth, and who gets it out of the building? One written offer answers both, because we are the buyer, the removal contractor and the hauler.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm CT. We never resell your contact information.
- Location
- Westmont, IL
- State
- Illinois
- Utilities
- ComEd, Ameren Illinois, City Wat
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Westmont
Coverage in Westmont is run off our Illinois routing along I-55, I-57, I-80, I-88 and I-294. Coordination with ComEd, Ameren Illinois, City Water Light and Power on clearances, metering removal and final disconnect is part of the scope, not a change order. Chicago and its collar counties give us the widest range of equipment on this site, from century-old switchgear in loft conversions to switchboards pulled out of Loop high-rises still under warranty. The industrial ring through Joliet, Cicero and the Calumet side runs railcar, tank and metals operations with heavy motor loads. Downstate is a different business entirely: the agricultural processing plants at Decatur and Peoria, the Ameren Illinois distribution system and the refineries in the southwest corner. Bus duct and bus plug work shows up here more than anywhere, because so much Chicago-area industrial and institutional building was wired on busway and the plugs come out by the pallet during renovations.
Paperwork travels with the job: a certificate of insurance naming your entity, a W-9, a signed purchase agreement listing every asset and its price, oil test and disposal manifests where transformers are in scope, and weight tickets or a bill of lading for what leaves the Westmont site. Maintenance, EHS and accounting each get the document they need.
Equipment
What we buy in Westmont
Fourteen categories. We buy every one of them at Westmont sites.
Bus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsElectrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Three things drive the number: condition, whether the equipment is still supported, and copper content. A medium-voltage line-up with current vacuum breakers and a recent test report prices as reusable equipment. An identical structure with obsolete air-magnetic breakers and no nameplate prices on its bus and steel. We tell you which bucket your Westmont gear falls into before you commit to anything.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Westmont site |
| Freight | I-55, I-57, I-80, I-88 and I-294 |
Safety
Safety and documentation
Safety is scope, not a brochure page. Crews working in Westmont operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
Westmont routes with these nearby Illinois sites:
Common questions
Westmont questions
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Westmont assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Westmont site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Westmont lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Westmont purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Westmont, or just broker it?
We buy it. Midwest Electrical Buyers is the purchaser of record — we fund the purchase, send our own crews to Westmont to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
Electrical equipment in Westmont?
Photos of the nameplates are enough to start. Written offer the same business day.